Design Patterns for Microservice Architecture – Health Endpoint Monitoring

Implement functional checks in an application that external tools can access through exposed endpoints at regular intervals. This can help to verify that applications and services are performing correctly.

Context and problem

It’s a good practice, and often a business requirement, to monitor web applications and back-end services, to ensure they’re available and performing correctly. However, it’s more difficult to monitor services running in the cloud than it is to monitor on-premises services. For example, you don’t have full control of the hosting environment, and the services typically depend on other services provided by platform vendors and others.

There are many factors that affect cloud-hosted applications such as network latency, the performance and availability of the underlying compute and storage systems, and the network bandwidth between them. The service can fail entirely or partially due to any of these factors. Therefore, you must verify at regular intervals that the service is performing correctly to ensure the required level of availability, which might be part of your service level agreement (SLA).


Implement health monitoring by sending requests to an endpoint on the application. The application should perform the necessary checks, and return an indication of its status.

A health monitoring check typically combines two factors:

  • The checks (if any) performed by the application or service in response to the request to the health verification endpoint.
  • Analysis of the results by the tool or framework that performs the health verification check.

The response code indicates the status of the application and, optionally, any components or services it uses. The latency or response time check is performed by the monitoring tool or framework. The figure provides an overview of the pattern.

Other checks that might be carried out by the health monitoring code in the application include:

  • Checking cloud storage or a database for availability and response time.
  • Checking other resources or services located in the application, or located elsewhere but used by the application.

Services and tools are available that monitor web applications by submitting a request to a configurable set of endpoints, and evaluating the results against a set of configurable rules. It’s relatively easy to create a service endpoint whose sole purpose is to perform some functional tests on the system.

Typical checks that can be performed by the monitoring tools include:

  • Validating the response code. For example, an HTTP response of 200 (OK) indicates that the application responded without error. The monitoring system might also check for other response codes to give more comprehensive results.
  • Checking the content of the response to detect errors, even when a 200 (OK) status code is returned. This can detect errors that affect only a section of the returned web page or service response. For example, checking the title of a page or looking for a specific phrase that indicates the correct page was returned.
  • Measuring the response time, which indicates a combination of the network latency and the time that the application took to execute the request. An increasing value can indicate an emerging problem with the application or network.
  • Checking resources or services located outside the application, such as a content delivery network used by the application to deliver content from global caches.
  • Checking for expiration of SSL certificates.
  • Measuring the response time of a DNS lookup for the URL of the application to measure DNS latency and DNS failures.
  • Validating the URL returned by the DNS lookup to ensure correct entries. This can help to avoid malicious request redirection through a successful attack on the DNS server.

It’s also useful, where possible, to run these checks from different on-premises or hosted locations to measure and compare response times. Ideally you should monitor applications from locations that are close to customers to get an accurate view of the performance from each location. In addition to providing a more robust checking mechanism, the results can help you decide on the deployment location for the application—and whether to deploy it in more than one datacenter.

Tests should also be run against all the service instances that customers use to ensure the application is working correctly for all customers. For example, if customer storage is spread across more than one storage account, the monitoring process should check all of these.

Issues and considerations

Consider the following points when deciding how to implement this pattern:

How to validate the response. For example, is just a single 200 (OK) status code sufficient to verify the application is working correctly? While this provides the most basic measure of application availability, and is the minimum implementation of this pattern, it provides little information about the operations, trends, and possible upcoming issues in the application.

Make sure that the application correctly returns a 200 (OK) only when the target resource is found and processed. In some scenarios, such as when using a master page to host the target web page, the server sends back a 200 (OK) status code instead of a 404 (Not Found) code, even when the target content page was not found.

The number of endpoints to expose for an application. One approach is to expose at least one endpoint for the core services that the application uses and another for lower priority services, allowing different levels of importance to be assigned to each monitoring result. Also consider exposing more endpoints, such as one for each core service, for additional monitoring granularity. For example, a health verification check might check the database, storage, and an external geocoding service that an application uses, with each requiring a different level of uptime and response time. The application could still be healthy if the geocoding service, or some other background task, is unavailable for a few minutes.

Whether to use the same endpoint for monitoring as is used for general access, but to a specific path designed for health verification checks, for example, /HealthCheck/{GUID}/ on the general access endpoint. This allows some functional tests in the application to be run by the monitoring tools, such as adding a new user registration, signing in, and placing a test order, while also verifying that the general access endpoint is available.

The type of information to collect in the service in response to monitoring requests, and how to return this information. Most existing tools and frameworks look only at the HTTP status code that the endpoint returns. To return and validate additional information, you might have to create a custom monitoring utility or service.

How much information to collect. Performing excessive processing during the check can overload the application and impact other users. The time it takes might exceed the timeout of the monitoring system so it marks the application as unavailable. Most applications include instrumentation such as error handlers and performance counters that log performance and detailed error information, this might be sufficient instead of returning additional information from a health verification check.

Caching the endpoint status. It could be expensive to run the health check too frequently. If the health status is reported through a dashboard, for example, you don’t want every request from the dashboard to trigger a health check. Instead, periodically check the system health and cache the status. Expose an endpoint that returns the cached status.

How to configure security for the monitoring endpoints to protect them from public access, which might expose the application to malicious attacks, risk the exposure of sensitive information, or attract denial of service (DoS) attacks. Typically this should be done in the application configuration so that it can be updated easily without restarting the application. Consider using one or more of the following techniques:

  • Secure the endpoint by requiring authentication. You can do this by using an authentication security key in the request header or by passing credentials with the request, provided that the monitoring service or tool supports authentication.
    • Use an obscure or hidden endpoint. For example, expose the endpoint on a different IP address to that used by the default application URL, configure the endpoint on a nonstandard HTTP port, and/or use a complex path to the test page. You can usually specify additional endpoint addresses and ports in the application configuration, and add entries for these endpoints to the DNS server if required to avoid having to specify the IP address directly.
    • Expose a method on an endpoint that accepts a parameter such as a key value or an operation mode value. Depending on the value supplied for this parameter, when a request is received the code can perform a specific test or set of tests, or return a 404 (Not Found) error if the parameter value isn’t recognized. The recognized parameter values could be set in the application configuration.DoS attacks are likely to have less impact on a separate endpoint that performs basic functional tests without compromising the operation of the application. Ideally, avoid using a test that might expose sensitive information. If you must return information that might be useful to an attacker, consider how you’ll protect the endpoint and the data from unauthorized access. In this case just relying on obscurity isn’t enough. You should also consider using an HTTPS connection and encrypting any sensitive data, although this will increase the load on the server.
  • How to access an endpoint that’s secured using authentication. Not all tools and frameworks can be configured to include credentials with the health verification request. For example, Microsoft Azure built-in health verification features can’t provide authentication credentials. Some third-party alternatives are PingdomPanoptaNewRelic, and Statuscake.
  • How to ensure that the monitoring agent is performing correctly. One approach is to expose an endpoint that simply returns a value from the application configuration or a random value that can be used to test the agent.Also ensure that the monitoring system performs checks on itself, such as a self-test and built-in test, to avoid it issuing false positive results.

When to use this pattern

This pattern is useful for:

  • Monitoring websites and web applications to verify availability.
  • Monitoring websites and web applications to check for correct operation.
  • Monitoring middle-tier or shared services to detect and isolate a failure that could disrupt other applications.
  • Complementing existing instrumentation in the application, such as performance counters and error handlers. Health verification checking doesn’t replace the requirement for logging and auditing in the application. Instrumentation can provide valuable information for an existing framework that monitors counters and error logs to detect failures or other issues. However, it can’t provide information if the application is unavailable.

Monitoring endpoints in Azure hosted applications

Some options for monitoring endpoints in Azure applications are:

  • Use the built-in monitoring features of Azure.
  • Use a third-party service or a framework such as Microsoft System Center Operations Manager.
  • Create a custom utility or a service that runs on your own or on a hosted server.Even though Azure provides a reasonably comprehensive set of monitoring options, you can use additional services and tools to provide extra information. Azure Management Services provides a built-in monitoring mechanism for alert rules. The alerts section of the management services page in the Azure portal allows you to configure up to ten alert rules per subscription for your services. These rules specify a condition and a threshold value for a service such as CPU load, or the number of requests or errors per second, and the service can automatically send email notifications to addresses you define in each rule.

The conditions you can monitor vary depending on the hosting mechanism you choose for your application (such as Web Sites, Cloud Services, Virtual Machines, or Mobile Services), but all of these include the ability to create an alert rule that uses a web endpoint you specify in the settings for your service. This endpoint should respond in a timely way so that the alert system can detect that the application is operating correctly.

If you host your application in Azure Cloud Services web and worker roles or Virtual Machines, you can take advantage of one of the built-in services in Azure called Traffic Manager. Traffic Manager is a routing and load-balancing service that can distribute requests to specific instances of your Cloud Services hosted application based on a range of rules and settings.

In addition to routing requests, Traffic Manager pings a URL, port, and relative path that you specify on a regular basis to determine which instances of the application defined in its rules are active and are responding to requests. If it detects a status code 200 (OK), it marks the application as available. Any other status code causes Traffic Manager to mark the application as offline. You can view the status in the Traffic Manager console, and configure the rule to reroute requests to other instances of the application that are responding.

However, Traffic Manager will only wait ten seconds to receive a response from the monitoring URL. Therefore, you should ensure that your health verification code executes in this time, allowing for network latency for the round trip from Traffic Manager to your application and back again.